Jan 29

A lot of people are getting hiring people to install FFMPEG as they think it’s a difficult task, but it’s much easier than you think if you follow these instructions. You should have root access & basic Linux knowledge to the server to follow these instructions.

1. Create a directory to do our work in
mkdir ~/ffmpeg
cd ~/ffmpeg

2. Get all the source files
wget http://www3.mplayerhq.hu/MPlayer/releases/codecs/ essential-20061022.tar.bz2
wget http://rubyforge.org/frs/download.php/9225/ flvtool2_1.0.5_rc6.tgz
wget http://easynews.dl.sourceforge.net/sourceforge/ lame/lame-3.97.tar.gz
wget http://superb-west.dl.sourceforge.net/sourceforge/ ffmpeg-php/ffmpeg-php-0.5.0.tbz2
wget http://downloads.xiph.org/releases/ ogg/libogg-1.1.3.tar.gz
wget http://downloads.xiph.org/releases/ vorbis/libvorbis-1.1.2.tar.gz

3. Extract all the source files
bunzip2 essential-20061022.tar.bz2; tar xvf essential-20061022.tar
tar zxvf flvtool2_1.0.5_rc6.tgz
tar zxvf lame-3.97.tar.gz
bunzip2 ffmpeg-php-0.5.0.tbz2; tar xvf ffmpeg-php-0.5.0.tar
tar zxvf libogg-1.1.3.tar.gz
tar zxvf libvorbis-1.1.2.tar.gz

4. Create the codecs directory & import them
mkdir /usr/local/lib/codecs/
mv essential-20061022/* /usr/local/lib/codecs/
chmod -R 755 /usr/local/lib/codecs/

5. Install SVN/Ruby (Depends on OS, this is for RHEL/CentOS)
yum install subversion
yum install ruby
yum install ncurses-devel

6. Get the latest FFMPEG/MPlayer from the subversion
svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg
svn checkout svn://svn.mplayerhq.hu/mplayer/trunk mplayer

7. Compile LAME
cd ~/ffmpeg/lame-3.97
./configure
make
make install

8. Compile libOGG
cd ~/ffmpeg/libogg-1.1.3
./configure
make
make install

9. Compile libVorbis
cd ~/ffmpeg/libvorbis-1.1.2
./configure
make
make install

10. Compile flvtool2
cd ~/ffmpeg/flvtool2_1.0.5_rc6
ruby setup.rb config
ruby setup.rb setup
ruby setup.rb install

11. Compile MPlayer
cd ~/ffmpeg/mplayer
./configure
make
make install

12. Compile FFMPEG
cd ~/ffmpeg/ffmpeg
./configure --enable-libmp3lame --enable-libogg --enable-libvorbis --disable-mmx --enable-shared
echo '#define HAVE_LRINTF 1' >> config.h
make
make install

13. Finalize the codec setups
ln -s /usr/local/lib/libavformat.so.50 /usr/lib/libavformat.so.50
ln -s /usr/local/lib/libavcodec.so.51 /usr/lib/libavcodec.so.51
ln -s /usr/local/lib/libavutil.so.49 /usr/lib/libavutil.so.49
ln -s /usr/local/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0
ln -s /usr/local/lib/libavformat.so.51 /usr/lib/libavformat.so.51

14. Compile FFMPEG-PHP
cd ~/ffmpeg/ ffmpeg-php-0.5.0
phpize
./configure
make
make install

15. Install FFMPEG-PHP (make sure the php.ini path is correct.)
echo 'extension=/usr/local/lib/php/extensions/ no-debug-non-zts-20020429/ffmpeg.so' >> /usr/local/Zend/etc/php.ini

16. Restart Apache to load FFMPEG-PHP (Depends on OS, this is for RHEL/CentOS)
service httpd restart

17. Verify if it works
php -r 'phpinfo();' | grep ffmpeg

If you get a few lines such as
ffmpeg
ffmpeg support (ffmpeg-php) => enabled
ffmpeg-php version => 0.5.0
ffmpeg.allow_persistent => 0 => 0

Then everything is installed and working. FFMPEG, FFMPEG-PHP, MPlayer, MEncoder, flv2tool, LAME MP3 encoder & libOGG.

Jan 29

I Hope You Enjoy My Video ,,, ;)

Windows XP After Modification Like Byrel Linux Debian  :D

was it fun ? Huh! ;)

Jan 29

السلام عليكم

كيف الحال ؟ عساكم بخير ؟

في الفتره الماضيه قمت بطرح شرح لتثبيت نظام التشغيل لينكس + شرح تثبيت المسنجر عليه

و جائني عدة اساله اكثرها كانت ” كيف صورت الشاشه و انت تعمل فورمات ”

الحل سهل و بسيط جدا

برنامج Parallels الخرافي الذي ينشء لك بارتشن او قرص افتراضي “غير حقيقي” و يقوم بعمل نظام تشغيل ثاني

يعني تشغل لينكس و انت مشغل وندوز
فهمتوني ؟

الي ما فهمني يشوف الصوره التاليه - انا قاعد بكتب بالموضوع و انا و شابك من الوندوز و بنفقس الوقت فاتح اللينكس بنافذه اخرى

طبعا مو بس تقدر تشغل لينكس تقدر تشغل اكثر من نظام تشغيل

شوف الصوره توضح انمة التشغيل الي يدعمها البرنامج

طيب بعد ما نحميل البرنامج و نعمله تثبيت مثل باقي البرامج نبي نشغله و نركب عليه اللينكس مثلا

اولا لتحميل البرنامج كامل مع الكراك

من هنا

لتنزيل نسخة لينكس + شرح الاعدادات اضغط هنا لكني انصح بشراء سي دي من السوق لانه حجمه كبير

الان حملنا البرنامج و ثبتناه و كركناه يعني فكيناه بالكراك ,,, و حملنا نظام اللينكس
نروح للبرنامج و نبداء العمل ( الصور تشرح كل شيء )

الان نختار نظام التشغيل الذي نريد و طبعا نريد لينكس

بعد ما نختار لينكس بيسالك البرنامج اي نسخه تريد ان تقوم بتثبيت

مره اخرى تذكير بالروابط التابعه للشرح

اولا لتحميل البرنامج كامل مع الكراك

من هنا

لتنزيل نسخة لينكس + شرح الاعدادات اضغط هنا لكني انصح بشراء سي دي من السوق لانه حجمه كبير

اسمح بنقل الشرح مع ذكر المصدر

Jan 29

Hello,

I am proud to announce the All New Flash Games Script that we are devloping now, its a script for playing Flash Games Script

full featured will eat up the competition with the other similiar scripts.

Arcade Flash Games Script

The most important thing in this script and the feature that all webmasters will love is that the script is Fully SEOed

Search Engine Friendly , that means Super Fast indexing of pages in Google and other search engines.

with ability to add multible games at once ,extract games from ZIP files. user can also add games,

Comments , Rating with Ajax System and even Registering procedure is made with Ajax in a very nice and simple way.

you can see the Flash Games Script live but have in mind that its still under devlopment.

We Gonna give free copy of the Flash Games Script with some features disabled, but the full script will not be epensive anyway.

we did not decide a Price yet, but its not going to be expensive .

you will have your very Own Flash Games Script up and running within 20 minutes .

The script is designed espacially to work perfect with Google Adsense that means your site will make more money

than others if your planing to use Google Adsense .

if you have any suggestions , comments , please don’t hesitat to Contact us ammandj (@) yahoo  . Com

or you can just add your comment in this post.

Thanks


Parse error: syntax error, unexpected '=', expecting ',' or ';' in /home/ammandjb/public_html/Slim/wp-content/themes/spiritualrelease/footer.php on line 1